Section B — General Limitations

When headsails or spinnakers are being changed, a replacing sail may be fully set and trimmed before the replaced sail is lowered. However, only one mainsail and, except when changing, only one spinnaker shall be carried set at a time.

Only one spinnaker pole or whisker pole shall be used at a time except when gybing. When in use, it shall be attached to the foremost mast spar (as defined in The Equipment Rules of Sailing).

No sail shall be sheeted over or through any device that exerts outward pressure on a sheet or clew of a sail at a point from which, with the boat upright, a vertical line would fall outside the hull or deck, except: (a) a headsail clew may be connected (as defined in The Equipment Rules of Sailing) to a whisker pole, provided that a spinnaker is not set; (b) any sail may be sheeted to or led above a boom that is regularly used for a sail and is permanently attached to the mast from which the head of the sail is set; (c) a headsail may be sheeted to its own boom that requires no adjustment when tacking; and (d) the boom of a sail may be sheeted to a bumkin.

For the purposes of rules 54 and 55 and Appendix G, the definitions of ‘headsail’ and ‘spinnaker’ in The Equipment Rules of Sailing shall be used.